UPS devices

 

 

Off Line UPS

 

(APC Back UPS) are basic defence line for protection of electronic devices. They are characterized by low cost but are less sophisticate compared to other types of UPS devices. Allows uninterruptible power supply, constant voltage, longer life and prevents the device over voltage and under voltage, current voltage drop on the network and damaging electrical equipment from lightning.

During normal operations provides input voltage to the protected device, in the event of power supply network failure or voltage variations outside of the set range, the UPS will supply the consumer with the battery via the inverter. After returning mains voltage inverter switcher off and the network is forwarded to the output to charge the battery The whole process typically takes to switch from 4 to 10 ms, which did not harm the work of a modern IT equipment, but the off-line technology UPS is not recommended as a professional protection equipment but as the protection of home computers, TV and audio equipment, cash register, electronic scales and etc.  Power range is from 325 to 1500VA and the battery autonomy average of 5 to 15 min.

 

APC Back UPS series comes in several models that feature characteristics type:

 

-  AVR (Automatic Voltage Regulation)

-  Protection of Ethernet 10/100BaseT

-  Protection for telephone line

-  Protection for coaxial connector

-  Additional out puts with over current protect

-  Communication through DB9/USB with the program for monitoring and automatic switch off

   computers PowerChute Personal Edition-l  The expansion of the primary battery autonomy

-  The possibility of cold start (no mains power)

-  Recurring the battery test with sound for alarm

 

 

    

 

 

 

 

 

 

Line Interactive UPS

(APC Smart UPS) to protect more advanced form of IT and electronic equipment based on similar technologies as an Offline UPS with improved conditioning and filtering the output voltage with pure sine wave output with short transition mode (zero crossing). Line interactive technologies can not eliminate all interference from the network but successfully reduce the effects of surges, collapse or other similar anomalies supply voltage.

Line Interactive UPS provides uninterrupted power supply, constant voltage, a longer device lifetime and guaranteed to prevent over voltage and under voltage, current voltage drop on the network, damage to electrical equipment from lightning.

APC representative in this technology is legendary Smart-UPS® Series confirmed for years of reliable service and is valid for the world's most popular UPS to protect servers, network storage and IT equipment. Power available range is from 750 to 5000VS, and can be found in tower or rack version with single phase input and output.

SmartUPS series comes in several models that feature characteristics type:

 

 

- AVR (Automatic Voltage Regulation)

-  Protection for Ethernet 10/100BaseT

-  High efficiency

-  Input power factor correction

-  Additional outputs with over current protect

-  Communication through DB9/RS232/USB with the program for monitoring

   and automatic switch off computes PowerChute Business Edition

-  Smart Slot for additional communication card (relay, Ethernet, Web/SNMP, Etc.)

-  The expansion of the primary battery autonomy

-  Battery replacement without stopping power

-  The possibility of a cold start (no mains power)

-  Recurring the battery test with sound for alarm

 

 

    

 

 

 

 

 

 

 

 

 

Double Conversion UPS (1/1 - 1/3)

 

Online of the fact that the technology is used where the double conversion inverter (output selection) are constantly active (On Line) and there is no interruption in the supply of consumers (zero transfer time). Technology is characterized by high reliability and operation without switching to battery in case of large variation and quality of power supply and excellent quality output voltage. Recommended as professional for servers, network, storage of IT equipmnt, VoIP and telecommunication systems, industrial applications and device in medical diagnostics and other areas where you need reliable and clean power.

APC in this technology offers the SmartUPS Online® as a continuation of the confirmed Smart UPS series with improved features double conversion. Power range is from 1 to 20kV, configuration single phase input and output for all models and three phase input single phase output models for over 8kVA. Featured SmartUPS OnLine features are:

-  Modulating the input voltage and frequency

-  A wide range of input voltage at full load

-  Input power factor corrected

-  High efficiency

-  Built-in automatic and manual ByPass

-  The internal battery pack, interchangeable "to hot"

-  Intelligent battery management - microprocessor controlled battery charging and

   automatic battery test periodically extends the life span of the same

-  Scalable autonomy - the ability to add external battery pack to achieve the desired

    autonomy of the device

-  PowerChute Software

-  Possibility of installation in the rack 2 to 12U

-  Cold start - the ability to run the device without the presence of power supply

-  Emergency Power Off (EPO) - incidental exclusion

-  UPS Network Management Card with Environmental Monitoring - standard

   on models over 5000VA

-  Wide range of optional accessories designed for the user

 

    

 

 

 

 

 

 

 

 

 

 

 

 

 

Double Conversion UPS (3/1 - 3/3)

 

Online or the fact that the technology is used where the double conversion inverter (output section) are constantly active (On Line) and there is no interruption in the supply of consumers (zero transfer time). The technology is characterized by high reliability and operation without switching to battery in case of large variation and quality of power supply and excellent quality output voltage. Recommended as professional protection for servers, network, storage of IT equipment, VoIP and telecommunication systems, industrial applications and devices in medical diagnostics and other areas where you need reliable and clean power.

APC in this technology offers several types of units depending on application and range of UPS power:

 

 

APC Smart-UPS VT®

 

 

 

 

 

Centralized uninterruptible power supply in power steps of 10, 15, 20, 30 and 40kVA ideal for use in smaller data centres (adapted IT equipment). Unit in addition to basic features characterize hot-swap modular/scalable battery, double-input power supply, the possibility of parallel work, the best performance in its class, the tab for the supervision and control environment as a standard and a choice of models that accurately match the request of user. In addition to the standard installation phase input I/O unit supports installation of three phase input single phase output for easy distribution of loads and the use of larger single phase product. Through innovative technical design, solved with a single power module, the time required for servicing and maintenance of this type of device (MTTR) is reduced. The unit comes in two basic models of width 30 or 60 cm and the model with the possibility of mounting the rack (Models 30 and

40 kVA), which reduces the required space to accommodate this type of equipment in data centers. The standard price includes certified start up service.

 

 

 

APC MGE Galaxy 3500

 

 

 

 

Centralized uninterruptible power supply in power steps of 10, 15, 20, 30 and 40 kVA with a high degree of protection IP51 is ideal for use in industrial environments and technical areas. Unit in addition to basic features characterize hot-swap modular/scalable battery, double-input power supply, the possibility of parallel work, the best performance in its class, the tab for the supervision and control environment as a standard and a choice of models that accurately match the request of user. Through innovative technical design, solved with a single power module, the time required for servicing and maintenance of this type of device (MTTR) is reduced. The unit comes in two basic models of width 30 or 60 cm with a frontal approach to service. The standard price includes certified start up service.

 

 

 

 

 

APC MGE Galaxy 5000

 

 

 

 

Flexible three phase power supply confirmed by reliable MGE products has been equally used for IT or industry and centralize application. Available in power steps of 20, 30, 40, 60, 80, 100 and 120kVA with power factor correction and low THDI suitable for working with aggregates of different characteristics. Pure on-line technology based on Sixpack IGBT reduces the possibility of failure and increases the MTBF time. High over load capabilities, improved battery monitoring, the input connection 3 phase no scratch, working with large inductive consumers, different ways of control, more configuration of the system are just some of the features that promise reliable operation and different conditions of use.

 

 

 

 

APC MGE Galaxy 7000

 

 

 

 

 

The newest device in the Galaxy series APC MGE Galaxy 7000 in power range 250, 300, 400 and 500kVA (160kVA soon). Robust IGBT design allows this unit to adapt to different types of inductive or capacitive loads without a reduction in the active force and thus ensure themselves a wide range of use, ranging from medium and large data centres to industrial and centralized application. Transformer-free design allows the device a high level of efficiency to 94.5 reducing operational costs. Parallel possibility, different system configuration, STS (Static Transformer Switch) and options for adaptation needs adds value to this unit for use in a highly professional environment.

 

 

 

 

 

 

 

 

 

 

Double Conversion Modular UPS

Comprehensive solution to protect IT and electronics conceived as a scalable, redundant modular solution as in accordance with the technological progress of IT equipment. Without weak points with redundant hot sections swap feature make this system an ideal solution for Data Centres voltage protection of vital interest to the operation of the business. Improving efficiency technologies Double Conversions were reflected by increasing the overall efficiency of the system which is particularly evident in 2 (N) systems under 50% load. Scalability makes the system suitable for use in projects with little-known system strength and amount of investment because it allows partial investment. Redundant systems and hot-swap feature reduces the possibility of human error, and service activities are kept to a minimum of time and complexities of shares. Availability configuration provides a high level of reliability with the N+1 feature for both the power module and battery. High input power factor of 1 and THDI below 5% with a soft start as a guarantee of reliable service with an electric engine. Feature of the advances devices, among other things, the management and control systems with wide selection of cards for remote control with a sophisticated system of internal analysis of the status of individual modules and diagnostic possible damages. Along with accessories such as Row Power Distribution, cable carriers and etc. Conditioning is an integral part of the progressive APC InfraStruXure® solutions for Data Centre (See our InfraStruXure^TM page for more details.). APC is the founder of commercial use of modular UPS system and such is a leader in this field with a series Symmetra that comes in several models, including the following one.

 

 

 

APC Symmetra PX 48

 

 

 

 

Symmetra from 16 to 48kW, all-in-one, 3/3, presents complete high-security solutions for small data centres located in minimal space of a server's 42U rack. The main components that build this system are power modules of 16kW, 32kW +16 (N+1) then the battery modular expandable, static switch for full power of 48kW, redundant system monitoring and management system, management of IP/SNMP and modular distribution for each circuit.

Efficiency of 95% even at the 50% load will preserve you in unnecessary annual costs of the system configuration of uninterruptible power supply 2(N+1), Tier III & IV.

 

 

 

APC Symmetra PX 160 

 

 

 

 

 

 

Symmetra PX 16 to 160kW 3/3, scalable/modular system of uninterruptible power supply is designed to protect equipment in medium and large Data Centres as well as other electronic equipment where high reliability of N+1 system is needed with reduced MTTR (Mean Time To Repair).

System architecture:

l  Modular UPS Symmetra PX composed of: UPS unit with controller, static switch (STS) build for maximum possible power of modular UPS, maintenance bypass (MBS) and battery modules.

l  UPS cabinet is modular and based on block architecture. It has ability to provide redundancy of system N+1, which means that failure of one module will not affect whole system and it will continue to work without interruption on same capacity.

l  UPS consists of maximum 10 power modules in parallel-redundant connection, entire power of 160kVA/kW or 144kW+16kW (N+1). Power modules of 16kVA/kW are built in Double OnLine Conversion technology, with corrected input power factor.

l  System consists of modular batteries - more parallel connected battery modules. Possibility to expand working autonomy with additional battery racks.

l  Power distribution cabinet (PD) housing automated switches, service by-pass and batteries, with surveillance trough network (by-pass switch positions and current value of output circuit)

l  UPS, through network interface, allows controlled switching off (Graceful Shut-down) one or more operational systems, trough Ethernet TCP/IP network while working on batteries.

l  All modules of equipment are suited in 19'' cabinet, 42U high and constitutes a harmonious and consistent whole with the existing IT cabinets

l  In the case of complete migration of equipment, system is possible to easily assemble in other conditions.

Characteristics of system:

Modular system, user configured by request and needs

Scalable by power and time autonomy

l  Output power factor PF=1 ( power in kV = power in kW) reduces need for greater power with equipment with power factor correction (PFC)

l  Uninterruptible power system based on UPS Symmetra PX has a battery system consists of parallel connected battery modules. The advantages of this variant are increase of entire UPS system availability and reduce the TCO (Total Cost of Ownership) costs and MTTR (Mean Time to Repair) is drastically reduced.

l  In case of power or battery module failure, unit will still supply with power with high reliability (no single point of failure)

l  UPS provides a permanent capacity in the case of service or replacement of defective parts, simply adding a power supply module into the existing infrastructure, without replacing the entire UPS.

l  Parallel power modules, spare batteries, static switches and redundant intelligence module in one system, are fully redundant solution (no single point of failure)

l  UPS has a distribution system to consumers and service (Maintenance) By-Pass (MBP), which provides power to load directly from the distribution system during the time when the UPS is isolated for reason of maintenance/servicing.

l  Static switch was sized with a maximum power (160kW) and has the ability to easily pull out of the cabinet, for service and/or replacement

l  Integrated Web/SNMP Card and Network Shutdown software provides a simple and functional monitoring and management from anywhere in the world

l  Construction of UPS allows customers to install/recover individual mains and battery modules during operation, without stopping the entire system-modules that work ("hot swap" feature). Replacement power modules and battery modules can be made by user staff, without participation of the service (User serviceable)

l  The system is easy to maintain, and detection of failures is many times easier.

 

 

 

APC Symmetra PX 250-500kW

 

 

 

 

 

Symmetra PX 250 to 500kW scalable/modular uninterruptible power protection equipment intended in large data centres and other electronic equipment which need high reliability system with N+1 feature and reduce MTTR. Like other devices in its class features a high efficiency of 96% regardless of the level loads below 50% or 100%. Symmetra PX 250-500kW set a new standard for modular high power devices, advanced solutions, technical features, functionality and economical in power and size. Reduce costs of over dimensioned device, by scalability of power modules and battery autonomies. The unit comes in two basic models up to 250kW and 500kW modules with power modules of 25kW in Double Conversion (On line) technology.

 

 

Delta Conversion Modular

 

 

Delta Conversion Modular, APC Symmetra MW.

On Line technology conversion with zero transfer time from On Line to Battery mode. The biggest efficiency in the world On Line UPS units of 97% and with scalability of unit reduces the costs of operating device.

Delta conversion uses difference in input/output energy and doesn't need to perform the entire process as Double Conversion from AC to DC and again to AC.

 

 

 

 

Symmetra MW 400 kW - 1.6MW

 

APC Symmetra MW presents the first modular UPS power over the 1MW and is available in power steps 400kW, 600kW, 800kW, 1MW, 1,2MW and 1,6MW etc.